Powder Springs, GA

Trouble shot bedroom circuit not working

I performed a diagnostic and repair on the main floor bathroom receptacles, I found that the gfci in the hall bath had recently been replaced by a family member and was wired incorrectly. I fixed the wiring and verified that the receptacle functions as it should

Replaced customer supplied breakers

Replaced faulty 150 main breaker. Restored power

I recently completed a home service project that involved adding new hardwired smoke detectors, rewiring the kitchen with recessed lighting, and installing all new arc fault breakers in the panel. The project required careful planning and execution to ensure that the electrical system was safe and up to code. I worked closely with the homeowner to identify the areas that needed improvement and to provide a detailed estimate of the costs and timeline for the project. One of the most challenging aspects of the project was rewiring the kitchen. The old wiring was outdated and prone to overheating, which could have been a fire hazard. I carefully removed the old wiring and replaced it with new, high-quality cables that were designed to withstand the heat and moisture of the kitchen. I also installed new recess

Provided an estimate to replace faulty breakers

Came out due to a bath tub leak on the second floor causing a can light on the main floor to cease functioning. I replaced all three can trims to ensure continuity of aesthetics. These can trims provide more light than the customer had previously and allows for an alternative night light function that is controlled by the existing light switch with no further upgrades needed

I was called to a home to replace the outlets in the kitchen. The previous outlets were not working properly, and I found that the wiring was faulty. I replaced the outlets with new ones and made sure that the wiring was properly connected. I also tested the outlets to ensure that they were working correctly.

Replaced faulty light switch in the master bedroom closet

I was called to replace the home's electrical panel. When I arrived, I found that the old panel was outdated and needed to be replaced. I removed the old panel and installed a new one, ensuring that all connections were secure and up to code. I also replaced the circuit breakers and wiring, making sure that everything was functioning properly. Finally, I tested the system to ensure that it was working correctly.